bearing 62010 bearing 50 90 20mm bearing

Deep groove ball bearing with seals or shields

Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.Integral sea

ling prolongs bearing service life

Simple, versatile and robust design

Low friction and high-speed capability

Accommodate radial and axial loads in both directions

Require little maintenance

Knowledge and introduction of bearings    :                                                                                                 

The 62010 bearing, with dimensions of 50mm, 90mm, and 20mm, is a type of deep groove ball bearing. Here's a detailed introduction to this specific bearing:

1. Bearing Type:

• The 62010 bearing is a deep groove ball bearing, which is a widely used type of rolling element bearing. It is designed to handle both radial and axial loads, although it is primarily used for radial load applications.

2. Dimensions:

• Inner Diameter (d): 50 mm

• Outer Diameter (D): 90 mm

• Width (B): 20 mm

• These dimensions make the 62010 bearing suitable for a variety of applications where space is limited, but the bearing must support both radial and axial loads.

3. Load Ratings:

• Deep groove ball bearings like the 62010 have dynamic load ratings and static load ratings that indicate the amount of load they can handle. These ratings are crucial for determining the suitability of the bearing for a specific application.

4. Construction:

• The 62010 bearing consists of four main components: the inner ring, the outer ring, the balls, and the cage (or retainer). The cage holds the balls in place and ensures even distribution as the bearing rotates.

5. Materials:

• Typically, the rings and balls of a 62010 bearing are made from chrome steel, which offers a good balance of hardness and durability. The cage can be made from various materials, including metal or engineering plastic, depending on the specific application requirements.

6. Applications:

• Deep groove ball bearings like the 62010 are versatile and can be found in a wide range of applications, such as electric motors, machine tool spindles, automotive wheels, and many types of industrial equipment where high speeds and precision are required.

7. Sealing and Lubrication:

• The 62010 bearing can be supplied with shields or seals on both sides to protect the bearing from contaminants and retain lubricant. The choice of seal type (e.g., rubber or metal) depends on the operating environment and the need for sealing effectiveness.

8. Maintenance:

• Regular maintenance is essential for the longevity of the 62010 bearing. This includes checking for wear, ensuring proper lubrication, and monitoring operating temperatures to prevent overheating, which can lead to premature failure.

9. Installation:

• Correct installation is critical to the performance and life of the 62010 bearing. It should be installed with the correct interference fit on the shaft and in the housing to ensure optimal operation and minimize the risk of damage.

In summary, the 62010 bearing is a deep groove ball bearing with dimensions of 50mm x 90mm x 20mm, designed to handle a variety of load conditions in numerous applications. Its design, materials, and construction make it a reliable choice for precision and high-speed applications. Proper installation and maintenance are key to ensuring the bearing's optimal performance and service life.

For further details on this product please directly contact our sales department under shh@dmsw.com 

 Our products                                                                                                                                                                 

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN