grease for automotive bearing

Deep groove ball bearing with seals or shields

Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.Integral sea

ling prolongs bearing service life

Simple, versatile and robust design

Low friction and high-speed capability

Accommodate radial and axial loads in both directions

Require little maintenance

Knowledge and introduction of bearings    :                                                                                                 

Grease for automotive bearings is a specialized lubricant designed to provide effective lubrication, protection, and performance in automotive applications. Below is a detailed introduction to this type of grease in English:

Overview

Automotive bearing grease is formulated to meet the unique requirements of automotive bearings, which are subject to high loads, varying speeds, and harsh operating conditions. It is designed to reduce friction and wear, prevent corrosion, and extend the life of automotive bearings.

Key Characteristics

1. Lubrication Properties:

• The grease has excellent lubrication properties, providing smooth and reliable operation of automotive bearings.

• It can handle a wide range of operating temperatures, ensuring consistent lubrication performance.

2. Corrosion Resistance:

• Automotive bearing grease contains corrosion inhibitors that protect the bearing surfaces from rust and corrosion.

• This is especially important in applications where bearings are exposed to water, road salt, and other corrosive agents.

3. Wear Resistance:

• The grease is formulated to reduce wear on bearing surfaces, extending the life of the bearings.

• It contains anti-wear additives that help to minimize friction and wear.

4. Thermal Stability:

• Automotive bearing grease can withstand high temperatures without breaking down or losing its lubricating properties.

• This is critical in applications where bearings are subject to high loads and speeds, generating significant heat.

5. Compatibility:

• The grease is compatible with a wide range of bearing materials, including steel, aluminum, and synthetic materials.

• It is also compatible with various seal materials, ensuring effective sealing and lubrication.

Types of Automotive Bearing Grease

There are several types of automotive bearing grease available, each designed for specific applications:

1. Lithium-Based Grease:

• Lithium-based grease is a common choice for automotive bearings due to its good balance of lubrication properties, corrosion resistance, and thermal stability.

• It is suitable for a wide range of operating temperatures and loads.

2. Calcium Sulfonate-Based Grease:

• Calcium sulfonate-based grease offers excellent corrosion resistance and water resistance.

• It is ideal for applications where bearings are exposed to water and corrosive agents.

3. Polyurea Grease:

• Polyurea grease has high shear stability and load-carrying capacity.

• It is suitable for high-speed and high-load applications.

Application and Maintenance

Applying automotive bearing grease involves the following steps:

1. Cleaning:

• Before applying grease, clean the bearing surfaces to remove any dirt, debris, or old grease.

• Use a suitable cleaner and follow the manufacturer's instructions.

2. Grease Application:

• Apply the grease to the bearing surfaces using a grease gun or other suitable tool.

• Ensure that the grease fills the bearing cavity and covers all contact surfaces.

3. Sealing:

• After applying the grease, install any seals or covers to prevent contamination and leakage.

• Check the seals regularly for wear or damage and replace them as needed.

4. Maintenance:

• Regularly inspect automotive bearings for signs of wear, corrosion, or contamination.

• Replenish the grease as needed to maintain proper lubrication.

• Follow the manufacturer's recommendations for grease type, application, and maintenance intervals.

Conclusion

Automotive bearing grease is a crucial component in ensuring the smooth and reliable operation of automotive bearings. By providing effective lubrication, corrosion resistance, and wear resistance, it helps to extend the life of bearings and reduce maintenance costs. When selecting and applying grease for automotive bearings, it is important to consider the specific requirements of the application and follow the manufacturer's recommendations.

For further details on this product please directly contact our sales department under shh@dmsw.com 

 Our products                                                                                                                                                                 

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN