fag 32238 tapered roller bearing automotive orginal special bearings smal bullet casting machine bearings for truck steel primary bearing remover

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The FAG 32238 tapered roller bearing is a high-performance bearing designed to support high radial and axial loads, making it suitable for a variety of automotive applications.

FAG 32238 Tapered Roller Bearing:

• Model Number: FAG 32238-A

• Inner Diameter: 190 mm

• Outer Diameter: 340 mm

• Width: 97 mm

• Basic Dynamic Load Rating: 1140 kN

• Basic Static Load Rating: 1820 kN

• Limiting Speed: 1930 1/min

• Reference Speed: 1150 1/min

• Mass: 39 kg

Features:

• The FAG 32238-A bearing is known for its ability to handle high radial and axial loads, which is essential in many automotive applications

  where precision and reliability are critical.

• It is available in X-life quality, which offers increased dynamic load ratings of up to 20%, an increase in service life of approximately 70% under the same operating conditions,

  and up to 75% less friction compared to standard bearings.

• This bearing is part of the single-row tapered roller bearings family, which accommodate radial and axial loads in one direction

  and are often positioned against a second tapered roller bearing in a mirror arrangement for technical reasons.

• The FAG 32238-A is designed for high speeds and is efficient at supporting forces, ensuring a precise and rigid shaft guidance system

  due to the large effective distance between the bearings.

• The bearing can be adjusted and dismantled, which makes mounting easy and contributes to its versatility in various applications.

Applications:

• The FAG 32238-A tapered roller bearing is used in a range of automotive applications due to its high load-carrying capacity and ability to operate efficiently at high speeds.

  It is also used in industrial settings where similar performance characteristics are required.

This bearing's robust design and high-quality construction make it a popular choice for applications where high performance and reliability are essential.

The FAG 32238-A is a testament to FAG's commitment to engineering excellence and reliability in bearing technology.

For further details on this product please directly contact our sales department under shh@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN