orginal special bearings smal bullet casting machine fag 32214 tapered roller bearing bearings

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity.  

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The FAG 32214 tapered roller bearing is a single-row bearing designed to accommodate combined radial and axial loads, making it suitable for various automotive applications.

FAG 32214 Tapered Roller Bearing:

• Specifications:

• Brand: FAG

• Item Number: 32214-DY FAG

• Category: Tapered Roller Bearing Single Row

• Inner Diameter (d): 70 mm

• Outer Diameter (D): 125 mm

• Width (B): 33.25 mm

• Weight: 1.633 kg

• Precision: Standard Precision

• Suffix Description: Tapered roller bearings produced in Korea and marketed under the FAG brand can be identified by the suffix -DY/-DZ

• Product Properties:

  The 32214-DY FAG is a single-row tapered roller bearing, known for its tapered rollers between the inner and outer rings.

  The raceways are conical, allowing these bearings to accommodate combined loads. They support high radial and axial loads (in one direction).

  The greater the contact angle, the greater the axial load capacity.

• Applications:

  The 32214-DY FAG bearing is easy to assemble and disassemble as it is a combination of a cup and a cone.

  The cone unit consists of an inner ring with a cage and roller set, while the cup is the outer ring. Single-row tapered roller bearings have an open design

  and must be mounted in a mirror-image arrangement together with a second tapered roller bearing.

  Paired bearing sets can also be applied in X, O, or tandem arrangements.

• Performance:

• High radial and axial load carrying capacity

• Accommodate axial loads in one direction

• Low friction and long service life

• Separable and interchangeable components 

• Technical Details:

• Basic dynamic load rating (Cr): 163 kN

• Basic static load rating (C0r): 214 kN

• Limiting speed: 5700 1/min

• Reference speed: 3450 1/min

• Fatigue limit load (Cur): 26500 N

• Mass: 1.81 kg 

The FAG 32214 tapered roller bearing is a robust and reliable choice for automotive applications where high performance and load capacity are essential.

Its design and construction make it a popular choice in many industries, including automotive, for applications requiring precision and durability.

For further details on this product please directly contact our sales department under shh@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN