Robust against mechanical fatigue 30303 Tapered Roller Bearing

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

? 

Installation Method: 

? 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

? 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The 30303 Tapered Roller Bearing is designed for efficient load handling in high-speed and heavy-load applications. With its tapered roller design, it is capable of supporting both radial and axial loads, making it ideal for a wide range of industrial, automotive, and heavy machinery applications. The bearing's precision engineering ensures smooth operation and long-lasting durability, even in demanding conditions.

Key Features and Benefits:

1. High Load Capacity
   The 30303 Tapered Roller Bearing is built to handle both radial and axial loads simultaneously. The tapered roller design distributes the load more efficiently across the contact surface, which results in higher load-carrying capacity than conventional bearings. This makes it suitable for use in automotive systems, gearboxes, pumps, and other industrial machinery where load management is critical.

2. Precision Engineering for Smooth Operation
   The bearing is manufactured from high-quality steel with precision-machined surfaces, ensuring that it operates smoothly even under high-speed conditions. The design minimizes friction between the rollers and raceways, reducing wear and heat generation. As a result, the bearing offers superior performance and reliability, extending the operational life of the machinery it supports.

3. Durability and Reliability
   The 30303 Tapered Roller Bearing is designed to perform reliably even in challenging conditions, such as high-speed rotation, heavy loads, and exposure to contaminants. Its robust construction allows it to withstand high temperatures, shock loads, and other stresses without compromising performance. This durability makes it a reliable component in critical machinery and applications.

4. Versatility Across Multiple Applications
   This bearing is versatile and can be used in a wide range of industries. It is commonly found in automotive wheel hubs, transmissions, industrial motors, conveyors, and heavy equipment. Whether handling continuous loads or dealing with shock loads, the 30303 bearing ensures consistent performance and high reliability in applications requiring both radial and axial load capabilities.

5. Optimized for High-Speed Performance
   The 30303 Tapered Roller Bearing is designed for high-speed operations, with a limiting speed of up to 16,000 RPM (depending on lubrication conditions). The bearing's low friction design minimizes heat buildup, ensuring smooth and efficient operation at high speeds. This feature is especially valuable for applications in the automotive and industrial sectors, where high-speed functionality is essential

• Bore Diameter (d): 17 mm

• Outer Diameter (D): 47 mm

• Width (B): 14 mm

• Dynamic Load Rating (C): 26.5 kN

• Static Load Rating (C0): 15.0 kN

• Limiting Speed: 16,000 RPM (depending on lubrication conditions)

• Material: High-carbon chromium steel (GCr15)

• Clearance: C2, C0, C3

• Tolerance: P0, P6, P5 (custom tolerances available)

With a dynamic load rating of 26.5 kN and a static load rating of 15.0 kN, the 30303 Tapered Roller Bearing is capable of handling substantial radial and axial loads. The high-speed capability of up to 16,000 RPM makes it ideal for use in fast-moving machinery and automotive applications.

Applications:

• Automotive: Used in wheel hubs, axles, and transmissions, where both radial and axial load support is required.

• Industrial Machinery: Suitable for gearboxes, motors, conveyors, and pumps, especially in applications that require high load capacity and reliability.

• Heavy Equipment: Common in construction and agricultural machinery that requires durable bearings capable of handling high shock loads and harsh conditions.

• Electric Motors: Provides smooth operation in motors with high-speed rotation and continuous load-bearing needs.

The 30303 Tapered Roller Bearing offers a durable, high-performance solution for applications that require both radial and axial load support. Its high load-carrying capacity, precision-engineered design, and ability to operate efficiently at high speeds make it an essential component in automotive, industrial, and heavy machinery applications. Whether used in gearboxes, wheel hubs, or other critical machinery, the 30303 bearing ensures long-lasting performance and reliability. Its ability to handle both types of loads, coupled with superior durability and precision, makes it an ideal choice for demanding environments.

For further details on this product please directly contact our sales department under timson@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN