30205 Tapered Roller Bearing – Precision Crafted for Heavy-Duty Success

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

? 

Installation Method: 

? 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

? 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The 30205 Tapered Roller Bearing is the ultimate solution for applications demanding exceptional performance under combined radial and axial loads. Designed with precision engineering and superior materials, this bearing delivers unmatched durability, efficiency, and adaptability. Whether in automotive systems, industrial machinery, or heavy equipment, the 30205 stands out as a versatile and reliable component that keeps your operations running smoothly.

Key Features and Benefits:

1. Efficient Load Management
   The 30205 Tapered Roller Bearing features a tapered inner and outer raceway design, enabling it to handle simultaneous radial and axial loads with precision. This design ensures optimal load distribution, reducing stress on the bearing and extending its service life.

2. Robust and Durable Construction
   Manufactured from high-carbon chromium steel (GCr15), the bearing is built to withstand extreme conditions, including high temperatures, heavy loads, and environmental challenges. Its durable construction minimizes wear and tear, offering long-term reliability in demanding applications.

3. Precision-Engineered for Smooth Operation
   With finely machined raceways and rollers, the 30205 minimizes friction, reducing heat generation and energy consumption. This ensures smooth and efficient operation, even in high-speed or high-load environments.

4. High-Speed Performance
   Capable of operating at rotational speeds of up to 12,000 RPM under proper lubrication, the 30205 is optimized for high-speed applications, ensuring stable performance and efficiency.

5. Versatile Across Industries
   The 30205 Tapered Roller Bearing adapts seamlessly to a wide range of applications, from automotive wheel hubs and gearboxes to industrial conveyor systems and heavy machinery. Its versatile design meets the demands of diverse industries.

Technical Specifications:

• Bore Diameter (d): 25 mm

• Outer Diameter (D): 52 mm

• Width (B): 16.25 mm

• Dynamic Load Rating (C): 36.5 kN

• Static Load Rating (C0): 32.5 kN

• Limiting Speed: 12,000 RPM (with appropriate lubrication)

• Material: High-carbon chromium steel (GCr15)

• Clearance: C0, C3 (customizable options available)

• Tolerance Classes: P0, P6, P5

Applications:

1. Automotive Industry
   Ideal for use in wheel hubs, gearboxes, and axles, the 30205 ensures reliable performance in light and heavy vehicles, handling high-speed rotations and combined loads with ease.

2. Industrial Machinery
   The bearing supports heavy-duty applications such as motors, pumps, and gear systems, ensuring durability and smooth operation in industrial environments.

3. Construction and Agricultural Equipment
   Perfect for heavy machinery used in construction and farming, the 30205 withstands high-impact conditions while maintaining optimal performance.

4. Power Transmission Systems
   Used in conveyors, pulleys, and other drive systems, the bearing enhances efficiency and reliability, reducing downtime and maintenance requirements.

Advantages of the 30205 Bearing:

• Precision Load Handling: The tapered design ensures maximum efficiency in managing combined loads.

• Long-Lasting Durability: Premium materials and engineering reduce wear and extend service life.

• Cost-Effective Performance: Minimal maintenance needs and energy-efficient operation save costs over time.

• Adaptable to Diverse Applications: A go-to solution for automotive, industrial, and heavy-duty equipment.

The 30205 Tapered Roller Bearing is engineered to meet the highest standards of precision, durability, and adaptability. Its robust design ensures reliable performance under heavy loads and high speeds, making it the perfect choice for industries that demand operational excellence. Whether you're upgrading automotive systems, optimizing industrial machinery, or maintaining construction equipment, the 30205 delivers unparalleled performance, ensuring your operations remain seamless and efficient.

Discover the power of precision with the 30205 Tapered Roller Bearing, and invest in a solution designed for today’s toughest challenges.

For further details on this product please directly contact our sales department under timson@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN