High-Capacity 320/28 Tapered Roller Bearing for Precision Engineering

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The 320/28 Tapered Roller Bearing is a robust and high-performance bearing designed for demanding industrial and automotive applications. Known for its exceptional load-carrying capacity, precision, and durability, this bearing is ideal for handling both radial and axial loads in various challenging operating conditions. Its engineering ensures smooth, efficient performance even under heavy or fluctuating loads, making it an essential component in machinery that requires reliability and long-term operation.

Key Features:

• Superior Load Handling: The 320/28 tapered roller bearing is designed with a conical roller geometry that allows it to accommodate both radial and axial loads simultaneously. This dual-load capacity makes it ideal for applications subjected to heavy duty operations or uneven load distribution.

• High-Strength Steel Construction: Manufactured from high-quality chrome steel or bearing steel, the 320/28 bearing offers exceptional strength, wear resistance, and durability. This ensures a longer service life even in harsh operating environments.

• Optimized Performance: The precise design of the 320/28 bearing minimizes friction and rolling resistance, resulting in smooth rotation, reduced heat buildup, and better energy efficiency. This contributes to better overall performance of the machinery in which the bearing is installed.

• Versatile Design: The 320/28 Tapered Roller Bearing is versatile, providing reliable performance in a wide range of industries, including automotive, agricultural, construction, and heavy-duty machinery. It is specifically suited for use in gearboxes, wheel hubs, and other equipment that require a bearing capable of handling both radial and axial loads.

Technical Specifications:

• Product Model: 320/28

• Bore Diameter (d): 28 mm

• Outer Diameter (D): 52 mm

• Width (B): 16 mm

• Dynamic Load Rating (C): 18.5 kN

• Static Load Rating (C0): 12.5 kN

• Limiting Speed: 5,500 RPM (depending on the operating conditions)

• Radial Clearance (C): Standard clearance (also available in other clearances upon request)

Performance Benefits:

• Enhanced Load Capacity: The tapered design of the 320/28 bearing enables it to handle significantly higher loads than traditional ball bearings. This is particularly beneficial in applications where high radial or axial loads are expected.

• Longer Service Life: The premium materials used in the construction of the 320/28 bearing, combined with precise manufacturing processes, contribute to its extended service life. This is an important consideration for equipment operators looking to minimize downtime and reduce the frequency of maintenance or part replacements.

• Improved Efficiency: The low friction properties of the 320/28 bearing help to reduce energy losses and heat buildup, improving the overall efficiency of the machinery it is installed in. This leads to smoother, quieter operation and less wear on other components.

• High Durability in Harsh Conditions: Whether exposed to moisture, dust, or varying temperatures, the 320/28 tapered roller bearing is built to withstand challenging conditions, making it suitable for a wide range of industrial environments.

Applications:

• Automotive: Wheel hubs, drive shafts, and transmissions

• Agricultural Machinery: Harvesters, tractors, and other farming equipment

• Construction Equipment: Excavators, bulldozers, and cranes

• Heavy-Duty Industrial Machinery: Gearboxes, conveyor systems, and pumps

• Mining and Metallurgical Equipment: Crushers, mills, and vibrating screens

The 320/28 Tapered Roller Bearing is a dependable solution for a wide variety of applications where reliability, high load capacity, and long service life are crucial. Whether used in automotive components, agricultural machinery, or heavy-duty industrial systems, this bearing ensures the smooth operation and performance of your equipment. Its precision-engineered design, coupled with high-strength materials, makes the 320/28 an excellent choice for engineers and manufacturers seeking quality, longevity, and efficiency in their machinery.

With the 320/28 tapered roller bearing, you can enhance operational efficiency, reduce maintenance costs, and extend the lifespan of your equipment, ensuring that it performs at its best in the toughest environments.

For further details on this product please directly contact our sales department under timson@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN