Precision-manufactured components 322/28 Tapered Roller Bearing for Heavy-Duty

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The 322/28 Tapered Roller Bearing is a precision-engineered, high-capacity bearing designed to perform in the most demanding industrial and automotive applications. This bearing is specially designed to handle both radial and axial loads simultaneously, making it an ideal solution for machinery and equipment subjected to heavy or fluctuating loads. Built to withstand challenging environments, the 322/28 bearing offers superior reliability, durability, and operational efficiency for a wide range of heavy-duty applications.

Key Features:

• Dual-Load Capacity: The 322/28 tapered roller bearing is designed to accommodate both radial and axial loads, making it highly versatile for applications where both types of loads are present. This ability to support combined loads significantly enhances the performance and longevity of the equipment in which it is installed.

• Premium Quality Steel Construction: Constructed from high-quality chrome steel or bearing steel, the 322/28 bearing ensures high load-carrying capacity, excellent wear resistance, and a long operational life. The use of advanced steel materials ensures the bearing performs reliably even in extreme conditions, reducing the need for frequent maintenance.

• Optimized for Efficiency: The precise geometry of the tapered rollers minimizes friction, contributing to smooth operation and reducing heat generation. This efficient design reduces energy consumption and increases the overall system efficiency, making it a cost-effective choice for machinery operators.

• Wide Application Range: The 322/28 Tapered Roller Bearing is ideal for use in automotive systems, industrial machinery, and heavy-duty equipment where load-bearing capability, low friction, and high durability are essential. Typical applications include gearboxes, wheel hubs, agricultural machinery, and construction equipment.

Technical Specifications:

• Product Model: 322/28

• Bore Diameter (d): 28 mm

• Outer Diameter (D): 52 mm

• Width (B): 16.25 mm

• Dynamic Load Rating (C): 22.5 kN

• Static Load Rating (C0): 14.8 kN

• Limiting Speed: 5,000 RPM (dependent on application conditions)

• Radial Clearance (C): Standard clearance (custom clearances available upon request)

Performance Advantages:

• Increased Load Capacity: The tapered roller design of the 322/28 bearing enables it to handle significantly higher loads than traditional ball bearings. The bearing’s optimized geometry and robust construction make it suitable for applications where high axial or radial loads are common, such as in automotive transmissions, industrial gearboxes, and heavy-duty machinery.

• Longer Service Life: Built with high-strength materials and manufactured to stringent tolerances, the 322/28 bearing provides superior durability and extended service life. This results in fewer bearing replacements, reducing downtime and maintenance costs over the life of the machinery.

• Reduced Heat and Friction: The precision-engineered rollers of the 322/28 bearing ensure smooth rotation with minimal friction. This results in reduced heat generation, lower operating temperatures, and improved overall energy efficiency, contributing to the long-term health of the machinery.

• Versatile in Harsh Conditions: The 322/28 tapered roller bearing is designed to operate reliably in challenging environments. It is resistant to wear, corrosion, and contamination from dust, dirt, and moisture, making it an ideal choice for industries such as construction, mining, and agriculture.

Applications:

• Automotive Industry: Wheel hubs, axles, driveshafts, and transmissions

• Industrial Machinery: Gearboxes, pumps, and conveyors

• Heavy-Duty Equipment: Construction machines, mining equipment, and industrial vehicles

• Agricultural Machinery: Tractors, harvesters, and farm equipment

The 322/28 Tapered Roller Bearing is engineered to provide superior performance and reliability under heavy loads and demanding conditions. With its high load capacity, long service life, and low friction operation, this bearing is an essential component for industries requiring durable and efficient bearings for their machinery.

Whether you're designing new equipment or replacing worn-out bearings in existing machinery, the 322/28 bearing ensures optimal performance and longevity. Its versatility makes it an ideal choice for a wide range of applications, including automotive, industrial, and agricultural sectors. When you choose the 322/28 tapered roller bearing, you're selecting a product that combines precision, efficiency, and reliability for your most critical applications.

For further details on this product please directly contact our sales department under timson@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN