Precision 32006 Tapered Roller Bearing for High-Load Industrial

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The 32006 Tapered Roller Bearing is a robust and precision-crafted bearing designed to handle high radial and axial loads, making it ideal for heavy-duty applications across a wide range of industries. Its tapered geometry allows it to efficiently support combined loads, while offering durability, reliability, and low maintenance costs. Whether used in automotive systems, construction equipment, or industrial machinery, the 32006 bearing excels in demanding environments where performance and longevity are critical.

Key Features:

• Dual-Load Capacity: The 32006 tapered roller bearing is specifically designed to bear both radial and axial loads simultaneously. This feature makes it perfect for applications where combined loading conditions are present, such as in automotive hubs, industrial gearboxes, and other heavy-duty machinery.

• High-Quality Material Construction: Made from premium chrome steel or bearing steel, the 32006 bearing offers exceptional strength and wear resistance. This construction material enhances its longevity, allowing it to perform reliably even under high-load and high-speed conditions.

• Low Friction and High Efficiency: The precision-machined tapered rollers ensure minimal friction during operation, which translates to reduced energy consumption and improved overall system efficiency. This design helps extend the service life of both the bearing and the equipment in which it is installed.

• Versatile and Reliable: The 32006 tapered roller bearing is versatile enough to be used across a wide range of applications, including automotive, agricultural, industrial, and construction machinery. It is engineered for smooth, reliable performance in even the most demanding environments.

Technical Specifications:

• Product Model: 32006

• Bore Diameter (d): 30 mm

• Outer Diameter (D): 55 mm

• Width (B): 17 mm

• Dynamic Load Rating (C): 20.3 kN

• Static Load Rating (C0): 13.3 kN

• Limiting Speed: 4,500 RPM (subject to application and operating conditions)

• Radial Clearance (C): Standard clearance (other clearances available upon request)

• Contact Angle: 15° (ideal for combined load applications)

Performance Advantages:

• High Load Capacity: The 32006 tapered roller bearing is designed to carry high radial and axial loads, making it suitable for demanding applications such as automotive wheel hubs, gearboxes, and industrial machinery. The tapered geometry increases the bearing's contact area, which enhances its load capacity compared to traditional ball bearings.

• Improved Longevity: Manufactured from high-grade steel, the 32006 bearing offers superior wear resistance, which significantly extends its operational lifespan. This durability helps reduce the frequency of bearing replacements, lowering maintenance costs and minimizing equipment downtime.

• Efficient Operation: The 32006 bearing is engineered to reduce friction, resulting in smoother operation and reduced heat buildup. This helps to maintain optimal operating temperatures, contributing to energy savings and improved overall system efficiency.

• Reliable Performance in Harsh Environments: Whether exposed to moisture, dust, or extreme temperatures, the 32006 tapered roller bearing is built to perform reliably in challenging conditions. Its rugged design ensures that it can handle the stresses of heavy-duty industrial applications, even in harsh and contaminated environments.

Applications:

• Automotive Industry: Wheel hubs, axles, transmissions, and drive shafts.

• Industrial Machinery: Gearboxes, conveyors, and pumps.

• Agricultural Equipment: Tractors, harvesters, and other farm machinery.

• Construction Equipment: Excavators, cranes, bulldozers, and other heavy-duty machines.

• Mining and Metallurgical Equipment: Crushers, mills, and vibrating screens.

The 32006 Tapered Roller Bearing is an ideal solution for industries that require high-performance, heavy-duty bearings. With its combination of high load capacity, durability, and efficient operation, it provides the necessary reliability and performance to ensure the smooth functioning of critical machinery.

Whether you are designing new equipment or replacing existing bearings, the 32006 tapered roller bearing is engineered to meet the demands of modern engineering and manufacturing. Its long service life, reduced maintenance requirements, and versatility make it a valuable component in machinery that operates under challenging conditions.

By choosing the 32006 tapered roller bearing, you are selecting a product that is engineered for high performance, reduced downtime, and enhanced operational efficiency. It is a critical component that helps ensure your equipment performs at its best, day in and day out.

For further details on this product please directly contact our sales department under timson@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN