Premium 30206 Tapered Roller Bearing for High-Load Applications

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The 30206 Tapered Roller Bearing is a high-performance, precision-engineered bearing designed to handle both radial and axial loads in demanding industrial, automotive, and machinery applications. Known for its versatility, durability, and robust construction, the 30206 bearing is ideal for use in environments where reliability and efficient operation are critical. Whether you're dealing with automotive components, gear systems, or industrial machinery, this bearing offers the strength and precision required for optimal performance.

Key Features:

• Dual-Load Capacity: The 30206 tapered roller bearing is specifically designed to bear both radial and axial loads simultaneously. This makes it perfect for applications that involve combined loads, such as automotive wheel hubs, gearboxes, and industrial machinery.

• Premium Steel Construction: Made from high-grade chrome steel or bearing steel, the 30206 bearing offers excellent wear resistance, strength, and durability. This robust material ensures the bearing can perform under extreme load conditions and in challenging environments.

• Low Friction and High Efficiency: The precisely manufactured tapered rollers reduce friction, which leads to smoother rotation, lower heat generation, and better overall efficiency. The result is improved energy savings and a longer lifespan for both the bearing and the equipment it supports.

• Versatile Application Range: This bearing is widely used in various industries, including automotive, agricultural machinery, heavy-duty construction equipment, and industrial systems. It is designed to perform reliably even in high-load, high-speed, and harsh operating environments.

Technical Specifications:

• Product Model: 30206

• Bore Diameter (d): 30 mm

• Outer Diameter (D): 62 mm

• Width (B): 17.25 mm

• Dynamic Load Rating (C): 24.5 kN

• Static Load Rating (C0): 14.5 kN

• Limiting Speed: 5,500 RPM (depending on application and operating conditions)

• Radial Clearance (C): Standard clearance (available in other clearances upon request)

• Contact Angle: 15° (ideal for combined load applications)

Performance Benefits:

• High Load Carrying Capacity: The tapered roller design enables the 30206 bearing to handle both radial and axial loads with ease, providing better load distribution and improved bearing life compared to standard ball bearings. Its high load capacity is essential for heavy-duty applications such as automotive axles, industrial machinery, and construction equipment.

• Long-Lasting Durability: The bearing’s premium steel material and precise manufacturing reduce the wear rate, enhancing its service life. This makes the 30206 bearing an excellent choice for applications that require frequent and consistent operation without the need for frequent maintenance or replacement.

• Energy-Efficient Operation: The low friction properties of the tapered roller design allow for smoother rotation, which in turn helps reduce heat buildup and lower operating temperatures. This energy-efficient performance reduces power consumption, improves the overall efficiency of the system, and contributes to better long-term performance.

• Reliability in Harsh Conditions: Built to withstand demanding operating environments, the 30206 tapered roller bearing is resistant to dust, dirt, and other contaminants, making it ideal for use in rugged environments like construction sites, agriculture, and mining.

Applications:

• Automotive Industry: Wheel hubs, transmissions, and axles.

• Industrial Equipment: Gearboxes, pumps, and conveyors.

• Agricultural Machinery: Tractors, harvesters, and other farm equipment.

• Construction Machinery: Excavators, bulldozers, and cranes.

• Mining and Heavy Equipment: Crushers, mills, and vibratory equipment.

The 30206 Tapered Roller Bearing is designed for heavy-duty, high-load applications that demand precision, reliability, and long-lasting performance. With its high load-bearing capacity, energy efficiency, and durability, the 30206 bearing provides the reliability needed for critical industrial and automotive systems.

By choosing the 30206 tapered roller bearing, you are investing in a high-quality component that can withstand the toughest operating conditions, reduce maintenance costs, and ensure the smooth operation of your equipment. Whether you are involved in manufacturing, automotive design, or industrial machinery repair, the 30206 bearing will help keep your systems running efficiently for the long term.

This bearing is a cost-effective solution for industries requiring high-performance bearings capable of handling a wide range of operational conditions. Its reliable performance and extended service life make it a valuable choice for both original equipment manufacturers (OEMs) and maintenance applications.

For further details on this product please directly contact our sales department under timson@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN