32206 High-Performance Precision Bearings – Industrial-Grade, Durable & Low Friction

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The 32206 high-performance precision bearing is engineered for industrial applications that demand reliability, durability, and efficient performance. Designed to meet the highest standards, this bearing is ideal for use in machinery, automotive components, and other heavy-duty applications where load-bearing capabilities, speed, and low friction are critical for optimal performance.

Key Features:

• High-Load Capacity: The 32206 bearing is designed to handle both radial and axial loads, making it versatile and suitable for applications where both types of forces are present. This makes it perfect for automotive, industrial machinery, and high-torque equipment.

• Durable Construction: Made from high-quality chrome steel or equivalent, the 32206 bearing features a hard, corrosion-resistant surface, ensuring long-lasting performance even in harsh environments. It is designed to withstand heavy-duty workloads, providing excellent resistance to wear and tear.

• Precision Manufacturing: With its precision machining, this bearing offers smooth, low-friction operation, reducing energy consumption and increasing overall system efficiency. It operates with minimal noise, contributing to quieter machinery and reduced vibration.

• Temperature Resilience: The 32206 bearing can operate effectively across a wide temperature range, making it suitable for use in both high-heat and low-temperature environments without compromising performance.

• Versatile Applications: This bearing is used in a broad spectrum of applications, including electric motors, gearboxes, automotive systems, and construction machinery, where high-performance and durability are paramount.

Technical Specifications:

• Bore Diameter (d): 30 mm

• Outer Diameter (D): 62 mm

• Width (B): 21 mm

• Dynamic Load Rating (C): 37.6 kN

• Static Load Rating (C0): 22.5 kN

• Limiting Speed: 9,000 RPM

• Material: Chrome Steel (GCr15) / Stainless Steel (optional)

• Precision Class: P0 (Standard Precision), P6 (For Higher Performance)

• Seal Type: Open or Shielded (Depending on Application)

• Operating Temperature Range: -30°C to +120°C

Applications:

The 32206 bearing is commonly used in various high-load, high-speed applications, including:

• Automotive: In wheel hubs, transmissions, and drive shafts, where it is essential to handle both radial and axial loads while minimizing wear and friction.

• Electric Motors: For use in motors requiring consistent, high-performance bearing solutions that can handle rapid rotations and temperature fluctuations.

• Industrial Machinery: Whether in CNC machines, conveyor belts, or pumps, the 32206 bearing ensures smooth and reliable operation for heavy-duty systems.

• Construction Equipment: Excavators, cranes, and other heavy construction machinery rely on durable bearings like the 32206 for improved efficiency and reduced downtime.

Why Choose the 32206 Bearing?

The 32206 bearing stands out in its class due to its combination of high performance, durability, and versatility. Its precision engineering ensures smooth, efficient operation across various applications, helping to improve machinery uptime and reduce maintenance costs. Additionally, the bearing’s robust material selection and careful design make it a cost-effective choice for long-term use in demanding environments.

For manufacturers and businesses looking to enhance operational efficiency, the 32206 bearing offers a reliable solution to meet the challenges of modern mechanical systems. Whether you are in the automotive, manufacturing, or industrial sector, this bearing ensures optimal performance and long-lasting reliability for your equipment.

For further details on this product please directly contact our sales department under timson@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN