Inner ring groove Outer ring flange thickness SKF 1319 Self-aligning ball bearings

Self-aligning ball bearing features

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring.  

They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.

It commodates static and dynamic misalignment, haa excellent high-speed performance, excellent light load performance and low friction.

Installation Methods and Usage Precautions for Self-aligning Ball Bearing                               

The installation of self-aligning ball bearings is a crucial process that can significantly impact the performance and longevity of the bearing. 

Here is a detailed guide on the installation method and usage precautions for self-aligning ball bearings: 

Installation Method: 

Cleanliness is key: Before installation, ensure that the mounting surfaces are clean and free of any dirt, dust, 

or debris that could affect the bearing's performance. 

Proper handling: Handle the bearing with care to prevent any damage to the components. Avoid dropping or hitting the bearing during installation. 

Correct mounting: Ensure that the bearing is mounted in the correct orientation and position as per the manufacturer's instructions. 

Improper mounting can lead to misalignment and premature bearing failure. 

Use appropriate tools: Utilize the correct tools and equipment for mounting the bearing to prevent any damage to the bearing or surrounding components. 

Lubrication: Proper lubrication is essential for the smooth operation of the bearing. 

Make sure to lubricate the bearing as per the manufacturer's recommendations. 

Usage Precautions: 

Misalignment: Self-aligning ball bearings are designed to accommodate misalignment to a certain extent. 

However, excessive misalignment can lead to increased wear and reduced bearing life. 

Temperature: Monitor the operating temperature of the bearing to ensure it remains within the recommended range. 

High temperatures can accelerate wear and cause premature failure. 

Overloading: Avoid overloading the bearing beyond its rated capacity as it can lead to increased stress and potential failure. 

Contamination: Protect the bearing from contamination by sealing it properly and keeping the surrounding area clean. 

Regular maintenance: Perform regular inspections and maintenance checks to detect any issues early and prevent unexpected failures. 

In summary, the correct installation of self-aligning ball bearings, along with following usage precautions, 

is essential for ensuring optimal performance and longevity of the bearing. 

By adhering to these guidelines, you can maximize the efficiency and reliability of your machinery.

Introduction and Knowledge of Self-aligning Ball Bearing                                                           

SKF 1319 Self-aligning Ball Bearings Overview:

• Design: The SKF 1319 self-aligning ball bearing is a robust bearing solution that features a unique design with two rows of balls,

  a spherical outer ring raceway, and two inner ring raceways.

  This design enables the bearing to self-align, compensating for angular misalignments that may occur due to shaft deflection or installation errors.

• Key Features:

• Self-alignment: The bearing's ability to self-align reduces stress on the shaft and housing, extending the life of the equipment.

• High Load Capacity: Designed to handle both radial and axial loads, making it suitable for a wide range of applications.

• Low Friction: The design minimizes friction, which helps in reducing energy consumption and heat generation.

• Versatility: Capable of operating under various conditions, including high speeds and light to moderate loads.

• Applications: These bearings are commonly used in applications such as agricultural machinery, conveyor systems,

  and general industrial equipment where there is a need for reliable performance and the ability to handle misalignment.

• Sealing and Protection: Available with seals on both sides (2RS1) to protect the bearing from contaminants and extend its service life,

  especially in harsh or dusty environments.

• Mounting: Tapered bore versions (suffix K) are available for easy mounting on shafts using an adapter sleeve, nut, and lock washer.

• Tolerances and Cage: Manufactured to meet specific tolerance standards,

  and equipped with high-quality cages that can withstand the operating conditions of the bearing.

• Performance: The SKF 1319 bearings are known for their high-speed capabilities and low vibration levels,

  contributing to smooth and efficient operation.

In summary, the SKF 1319 Self-aligning ball bearings are engineered for reliability and performance in applications where misalignment is a concern.

Their design ensures minimal maintenance and long service life, making them a trusted choice in the industry.

For further details on this product please directly contact our sales department under shh@dmsw.com

Our Products                                                                                                                                      

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN