Rolling path Anti-skid surface SKF 1322J Self-aligning ball bearing

Self-aligning ball bearing features

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring.  

They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.

It commodates static and dynamic misalignment, haa excellent high-speed performance, excellent light load performance and low friction.

Installation Methods and Usage Precautions for Self-aligning Ball Bearing                               

The installation of self-aligning ball bearings is a crucial process that can significantly impact the performance and longevity of the bearing. 

Here is a detailed guide on the installation method and usage precautions for self-aligning ball bearings: 

Installation Method: 

Cleanliness is key: Before installation, ensure that the mounting surfaces are clean and free of any dirt, dust, 

or debris that could affect the bearing's performance. 

Proper handling: Handle the bearing with care to prevent any damage to the components. Avoid dropping or hitting the bearing during installation. 

Correct mounting: Ensure that the bearing is mounted in the correct orientation and position as per the manufacturer's instructions. 

Improper mounting can lead to misalignment and premature bearing failure. 

Use appropriate tools: Utilize the correct tools and equipment for mounting the bearing to prevent any damage to the bearing or surrounding components. 

Lubrication: Proper lubrication is essential for the smooth operation of the bearing. 

Make sure to lubricate the bearing as per the manufacturer's recommendations. 

Usage Precautions: 

Misalignment: Self-aligning ball bearings are designed to accommodate misalignment to a certain extent. 

However, excessive misalignment can lead to increased wear and reduced bearing life. 

Temperature: Monitor the operating temperature of the bearing to ensure it remains within the recommended range. 

High temperatures can accelerate wear and cause premature failure. 

Overloading: Avoid overloading the bearing beyond its rated capacity as it can lead to increased stress and potential failure. 

Contamination: Protect the bearing from contamination by sealing it properly and keeping the surrounding area clean. 

Regular maintenance: Perform regular inspections and maintenance checks to detect any issues early and prevent unexpected failures. 

In summary, the correct installation of self-aligning ball bearings, along with following usage precautions, 

is essential for ensuring optimal performance and longevity of the bearing. 

By adhering to these guidelines, you can maximize the efficiency and reliability of your machinery.

Introduction and Knowledge of Self-aligning Ball Bearing                                                           

SKF 1322J Self-aligning Ball Bearings:

• Design & Construction: The SKF 1322J self-aligning ball bearing is designed with a tapered bore, featuring two rows of balls,

  a common sphered raceway in the outer ring, and two deep uninterrupted raceway grooves in the inner ring.

  This design allows the bearing to be insensitive to angular misalignment of the shaft relative to the housing,

  which can be caused by shaft deflection or other factors.

• Key Features:

• Ease of Mounting: The tapered bore facilitates ease of mounting via adapter sleeves or withdrawal sleeves.

• Self-alignment: The bearing can accommodate both static and dynamic misalignment,

  making it suitable for applications where the shaft may not be perfectly aligned with the housing.

• High-Speed Performance: Self-aligning ball bearings generate less friction than any other type of rolling bearing,

  which enables them to run cooler even at high speeds.

• Low Friction: Very loose conformity between balls and outer ring keeps friction and frictional heat at low levels,

  contributing to energy efficiency and reduced wear.

• Light Load Performance: Self-aligning ball bearings have low minimum load requirements and perform well under light load conditions.

• Low Noise: These bearings can reduce noise and vibration levels, making them suitable for applications

  such as fans where noise reduction is important.

• Applications: SKF 1322J self-aligning ball bearings are used in a variety of applications where misalignment is a concern,

  such as agricultural machinery, conveyor systems, and general industrial equipment.

• Maintenance: Due to low heat generation, the bearing temperature is lower, leading to extended bearing life and maintenance intervals.

In summary, the SKF 1322J Self-aligning ball bearings are engineered for reliability and performance in applications where misalignment is a concern.

Their design ensures minimal maintenance and long service life, making them a trusted choice in the industry.

For further details on this product please directly contact our sales department under shh@dmsw.com

Our Products                                                                                                                                      

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN