Machine tool spindle Robotics joint SKF 2314 Self-aligning ball bearings

Self-aligning ball bearing features

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring.  

They are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.

It commodates static and dynamic misalignment, haa excellent high-speed performance, excellent light load performance and low friction.

Installation Methods and Usage Precautions for Self-aligning Ball Bearing                               

The installation of self-aligning ball bearings is a crucial process that can significantly impact the performance and longevity of the bearing. 

Here is a detailed guide on the installation method and usage precautions for self-aligning ball bearings: 

Installation Method: 

Cleanliness is key: Before installation, ensure that the mounting surfaces are clean and free of any dirt, dust, 

or debris that could affect the bearing's performance. 

Proper handling: Handle the bearing with care to prevent any damage to the components. Avoid dropping or hitting the bearing during installation. 

Correct mounting: Ensure that the bearing is mounted in the correct orientation and position as per the manufacturer's instructions. 

Improper mounting can lead to misalignment and premature bearing failure. 

Use appropriate tools: Utilize the correct tools and equipment for mounting the bearing to prevent any damage to the bearing or surrounding components. 

Lubrication: Proper lubrication is essential for the smooth operation of the bearing. 

Make sure to lubricate the bearing as per the manufacturer's recommendations. 

Usage Precautions: 

Misalignment: Self-aligning ball bearings are designed to accommodate misalignment to a certain extent. 

However, excessive misalignment can lead to increased wear and reduced bearing life. 

Temperature: Monitor the operating temperature of the bearing to ensure it remains within the recommended range. 

High temperatures can accelerate wear and cause premature failure. 

Overloading: Avoid overloading the bearing beyond its rated capacity as it can lead to increased stress and potential failure. 

Contamination: Protect the bearing from contamination by sealing it properly and keeping the surrounding area clean. 

Regular maintenance: Perform regular inspections and maintenance checks to detect any issues early and prevent unexpected failures. 

In summary, the correct installation of self-aligning ball bearings, along with following usage precautions, 

is essential for ensuring optimal performance and longevity of the bearing. 

By adhering to these guidelines, you can maximize the efficiency and reliability of your machinery.

Introduction and Knowledge of Self-aligning Ball Bearing                                                           

SKF 2314 Self-aligning Ball Bearings

• Design and Features:

  SKF 2314 self-aligning ball bearings are designed with a spherical raceway in the outer ring and a double raceway in the inner ring,

  providing the bearing with self-aligning properties.

  This feature allows the bearing to maintain optimal operation even when there is angular misalignment between the shaft and the housing,

  which can be caused by factors such as shaft deflection.

• Load Capacity

  These bearings are primarily designed to carry radial loads and can also handle light axial loads.

  However, they are not suitable for pure axial loads.

• Internal Clearance

  SKF self-aligning ball bearings, including the 2314 series, have specific values for permissible misalignment errors.

  Bearings with the "E" suffix have higher load ratings than the original standard design due to improvements in internal construction.

• Cages

  The bearings are supplied with a glass fiber reinforced, 6.6 polyamide cage as standard.

  Machined brass or pressed steel cages are also available for other sizes.

• Applications

  SKF 2314 bearings are particularly suitable for applications where misalignment can arise from errors in mounting or from shaft deflection.

  They are commonly used in applications with high-speed requirements and light load conditions, such as fans,

  where they can reduce noise and vibration levels.

• Performance

  Self-aligning ball bearings generate less friction than any other type of rolling bearing, enabling them to run cooler even at high speeds.

  This low friction also contributes to extended bearing life and maintenance intervals.

• Mounting

  Bearings with a tapered bore, such as the 2314 K, can be mounted using adapter sleeves or withdrawal sleeves.

  Proper mounting ensures a sufficiently tight fit and the correct residual clearance.

• Technical Specifications

  For detailed dimensions, load ratings, and speed limits, refer to the specific product tables provided by SKF,

  which include information on bearing dimensions, abutment and seat dimensions, and mass.

The SKF 2314 self-aligning ball bearings offer a robust solution for machinery that demands precision and reliability in the face of challenging conditions,

providing a reliable support for your rotating equipment.

For further details on this product please directly contact our sales department under shh@dmsw.com

Our Products                                                                                                                                      

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN