Standard dimension Customized size SKF 32928 Tapered Roller Bearings

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

The SKF 32928 Tapered Roller Bearing is engineered to manage combined radial and axial loads with precision and efficiency.

• Design

  The 32928 is a single-row tapered roller bearing with a separable inner ring (cone) and outer ring (cup),

  which facilitates individual mounting and maintenance.

• Load Ratings

  It boasts a dynamic load rating of 205kN and a static load rating of 390kN, making it suitable for applications with significant load demands.

• Dimensions

  The bearing has an inside diameter of 140mm, an outside diameter of 190mm, and a width of 32mm,

  providing a robust structure for various industrial applications.

• Performance

  With a fatigue load limit of 40kN and speed ratings that include a reference speed of 2,200 r/min and a limiting speed of 3,400 r/min,

  the 32928 is designed for high-performance operations.

• Construction

  The bearing features a logarithmic contact profile, which optimizes stress distribution across the roller/raceway contacts,

  enhancing operational reliability and reducing sensitivity to misalignment.

• Lubrication:

  The special design of the sliding surfaces of the guide flange and large roller ends promotes lubricant film formation,

  further increasing operational reliability.

• Mass

  The 32928 has a mass of 2.55kg, which is an important consideration for balance and weight distribution in machinery.

This bearing is a key component in applications requiring high load capacity and precision, such as in the automotive, aerospace, and heavy machinery industries.

For further details on this product please directly contact our sales department under shh@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN