Noise reduction Vibration damping SKF 32936 Tapered Roller Bearings

Single row tapered roller bearings

Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. 

The inner ring, with rollers and cage, can be mounted separately from the outer ring. 

These separable and interchangeable components facilitate mounting, dismounting and maintenance. 

By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

High radial and axial load carrying capacity accommodate axial loads in one direction. 

It has Low friction and long service life, eparable and interchangeable components.

Installation Method and Usage Precautions of Tapered Roller Bearings: :                                                 

Tapered roller bearings are commonly used in various machinery and equipment for their ability to support high radial and axial loads. 

Proper installation and maintenance are crucial to ensure their performance and longevity. 

Installation Method: 

1.Clean the shaft and housing before installation to remove any dirt or debris that could affect the bearing's performance. 

2.Apply a thin layer of lubricant to the bearing surfaces to reduce friction during installation. 

3.Use a suitable tool, such as a press or a mounting sleeve, to apply force evenly on the inner ring while mounting the bearing onto the shaft. 

4.Ensure that the bearing is seated properly and securely on the shaft without any misalignment. 

5.Install the bearing housing carefully to avoid any damage to the bearing or the housing itself. 

6.Tighten the mounting bolts to the recommended torque values to secure the bearing in place. 

Usage Precautions: 

1.Regularly inspect the bearing for any signs of wear, damage, or contamination. Replace the bearing if any abnormality is detected. 

2.Monitor the operating temperature of the bearing to prevent overheating, which can lead to premature failure. 

3.Maintain the proper lubrication level and replenish the lubricant as needed to ensure smooth operation. 

4.Avoid overloading the bearing beyond its rated capacity to prevent excessive wear and potential failure. 

5.Protect the bearing from contaminants such as dust, dirt, and moisture, which can accelerate wear and reduce the bearing's lifespan. 

6.Follow the manufacturer's recommendations for maintenance intervals and procedures to prolong the bearing's service life. 

In conclusion, proper installation and regular maintenance are essential for ensuring the reliable performance of tapered roller bearings. 

By following the recommended installation method and usage precautions, you can maximize the bearing's efficiency and durability in your machinery and equipment.

Introduction about Tapered Roller Bearings                                                                                                                                               

SKF 32936 Tapered Roller Bearings are designed to handle high radial loads and bidirectional axial loads, making them suitable for a variety of industrial applications.

Design and Construction

The SKF 32936 is a single row tapered roller bearing, which is designed to accommodate combined radial and axial loads and provide low friction during operation.

The inner ring, with rollers and cage, can be mounted separately from the outer ring, allowing for easier mounting, dismounting, and maintenance.

Load Carrying Capacity

These bearings have a high radial and axial load carrying capacity and can accommodate axial loads in one direction.

Performance Benefits

SKF tapered roller bearings, including the 32936 series, offer extended service life, high load carrying capacity, lower operating temperatures, less vibration and noise,

high performance in poor lubrication, reduced energy and lubricant consumption, extended maintenance intervals, and reduced operating costs.

Manufacturing and Material

SKF tapered roller bearings are manufactured with high-purity steel that exceeds DIN/ISO requirements in terms of homogeneity and inclusions,

enabling exceptional strength and durability.

Low Operating Temperature

A unique roller end/flare contact zone allows the immediate build-up of lubricant film even at low speeds, preventing temperature spikes

during running-in and continuous operation.

Best-in-Class Rollers

Zero Defect manufacturing helps ensure that each roller is virtually identical to the next, supporting load carrying capacity and enabling even stress distribution in the bearing.

High Effective Load Carrying Capacity

The logarithmic profile of the TQ-line is less sensitive to extreme load variations, misalignment, moment, and shock loads.

This creates a larger contact area, enabling a higher effective carrying capacity, particularly during shock and peak loads.

Low Noise and Vibration Level

State-of-the-art manufacturing techniques ensure very low dimensional spread and deviation of ring and roller parameters, resulting in reduced noise for critical applications.

High Surface Hardness

TQ-Line tapered roller bearings feature high surface hardness up to 65 HRC, plus homogeneous material and hardness structures of the bearing rings,

providing high resistance to surface damages caused by contaminated lubricating oils, leading to longer service life and oil change intervals.

Matched Pairs

The matched single row tapered roller bearing, such as the 32936, is generally used to support high radial load and bidirectional axial load,

or when the shaft system needs two-way axial positioning and needs to achieve the given preload or clearance conditions.

After being matched in pair, the original axial clearance of the bearing is fixed, simplifying the installation procedure and avoiding installation errors.

These bearings are widely used in various equipment, including rolling mills, petroleum machinery, and medium to large reducers, due to their ability to handle high loads and provide reliable performance.

For further details on this product please directly contact our sales department under shh@dmsw.com

 Our Products                                                                                                                                                             

Ball Bearings

SKF

NSK

FAG

TIMKEN

          IKO

NTN

GMN