Products Portfolio
Bringing more cost-effective bearings to machinery
PTFE composite straight bushing, inch sizeThis product is made to order. Lead times may vary. Contact your distributor for more information.PTFE composite straight (cylindrical) bushings, inch sizes, are suitable for oscillating, rotating and linear movements, and can accommodate radial loads.
Drawn cup needle roller bearing with open endsDrawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly, but where a very compact and economical bearing arrangement is required. Owing to their large nu
Bearing seat is a type of comprehensive load, which has the characteristics of convenient device maintenance. Where there are bearings, there should be support points. The inner support point of the bearing is the shaft, and the outer support is commonly known as the bearing seat.The mea
Deep groove ball bearing formerly known as single row radial ball bearing, is the most widely used a kind of rolling bearing, which is characterized by low friction resistance, high speed, can be used to bear radial load or radial and axial simultaneous action of the combined load on the machine par
Four point contact ball bearings are a type of separated bearing, or a set of angular contact ball bearings that can withstand bidirectional axial loads. The inner and outer raceways have a peach shaped cross-section. When there is no load or pure radial load, the steel ball and the ring present a f
The structure of joint bearings is simpler than that of rolling bearings, mainly consisting of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface.It is generally used for low-speed swing motion, namely angular motion. Due to the spherical sliding surface,
Thrust needle roller bearingThe thrust bearing consists of a thrust cage assembly with needle or cylindrical rollers or balls and a thrust washer. The needle roller and cylindrical roller are held and guided by the thrust cage. When used with thrust bearing washers of different series, many differen
Insert bearing with set screw locking and extended inner ringInsert bearings are based on sealed deep groove ball bearings. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by
Radial spherical plain bearing, maintenance-free, metric sizesRadial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/PTFE fabric sliding contact surface combination and the bearings are main
Spindle bearingsSingle row angular contact ball spindle bearings can only withstand axial loads in one direction, which will cause additional axial forces when subjected to radial loads. And can only limit the axial displacement of the shaft or shell in one direction. The contact angle of the bearin
Our Timson Power Technology (Shanghai) Co., Ltd was founded in 2012 and we beganattempting online transactions through the Bearing Mall in 2014. Collectively our staff have decades of experience in the bearing trade and we are also authorised distributors of some of the world’s leading manufacturers, meaning we can offer industry leading service and prices.
Building 1, No. 1036 Xizha Road, Fengxian District, Shanghai
+86-021-32525340
shh@dmsw.com
