BEARINGS
Full range of bearing product solutions
The structure of joint bearings is simpler than that of rolling bearings, mainly consisting of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface.It is generally used for low-speed swing motion, namely angular motion. Due to the spherical sliding surface,
Thrust needle roller bearingThe thrust bearing consists of a thrust cage assembly with needle or cylindrical rollers or balls and a thrust washer. The needle roller and cylindrical roller are held and guided by the thrust cage. When used with thrust bearing washers of different series, many differen
Insert bearing with set screw locking and extended inner ringInsert bearings are based on sealed deep groove ball bearings. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by
Radial spherical plain bearing, maintenance-free, metric sizesRadial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/PTFE fabric sliding contact surface combination and the bearings are main
Spindle bearingsSingle row angular contact ball spindle bearings can only withstand axial loads in one direction, which will cause additional axial forces when subjected to radial loads. And can only limit the axial displacement of the shaft or shell in one direction. The contact angle of the bearin
Rotary table bearing is a special structural large bearing that can simultaneously withstand large axial loads, radial loads, and overturning moments, and integrates multiple functions such as support, rotation, transmission, and fixation.Basic structureRotary bearings are usually composed of four m
Single row tapered roller bearingSingle row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable
The NA roller chain idler sprocket unit is a guide and return unit for the roller liner chain and roller chain, which can compensate for chain tension caused by operation and provide smoother system operation under high loads and speeds.The units to be installed include sprockets and deep groove bal
The idler unit is a tensioning system for belt drive and idler unitIncrease the wrap angle of the belt driveTherefore, it can support higher power levels or allow the use of smaller unitsBelt tension caused by compensation operationAllow shorter center distanceReduce wear on belt drivesThe ready-mad
Ball bearings and rollers are inseparable and are single or double row ball bearings with thick outer rings. In addition to high radial forces, these bearings can also support bidirectional axial forces.Supporting roller bearings are single or double row units installed on shafts or bolts. It consis
Our Timson Power Technology (Shanghai) Co., Ltd was founded in 2012 and we beganattempting online transactions through the Bearing Mall in 2014. Collectively our staff have decades of experience in the bearing trade and we are also authorised distributors of some of the world’s leading manufacturers, meaning we can offer industry leading service and prices.
Building 1, No. 1036 Xizha Road, Fengxian District, Shanghai
+86-021-32525340
shh@dmsw.com
